Juwel TEWS 84 Electric Torque Wrench
850 N.m Angled Electric Torque Wrench, ±3.5%, Square Drive 3/4“ - 1“
| Part No | 51 084 200 |
| Model | TEWS-84 |
| Accuracy | ±3.5% |
| Torque Range | 150 - 850 N.m |
| Drive | 3/4" - 1" Square |
| Operation Dir. | Clockwise & c.clockwise |
| Operation Pos. | Angled |
| Max. Revolution | 16 rpm |
| Power Supply | Electricity |
| Calibration | Supplied with the tool |
| Brand - Origin | Juwel / Germany |
Please fill out the form below or call us at +90 312 386 1464 to get in contact with our sales representatives.
- Tightening & loosening capacity up to 10.000 Nm
- Accuracy up to ±3.5% with cut off system
- Analog control unit with 200 different torque settings
- Tool stops when selected torque value reached
- 2 speed gear mechanism for slow & fast operations
- Supplied with a Juwel house calibration certificate.
- Both 220 and 110 volt operation power available
- Freely rototable gearbox enables ergonomic use
- Technichal support & calibration service in Turkey
.jpg)
Juwel TEWS Series Angled Electronic Torque Wrenches
Due to continuous further development, Juwel uses a drive motor characterised by extreme power reserves here. This has a particularly positive effect in the area of "Wear of electromechanical components", e.g. carbon brushes and motor anchors, since these motors are used far below their performance limit.
Furthermore, the deactivation electronic, which has proven its worth for decades, was revised. It is now, among others, characterised by a novel electronic lock of the left-/rightward operation in the area of "Work and process safety".
| Part No. | Model | Torque Range | Drive (A) | Idle Speed | Sizes (mm) | Weight | ||
| # | # | N.m | inch | r/m (rpm) | H | C | D | Kg |
| 51 084 200 | TEWS-84 | 150-850 | 3/4"-1" | 16 | 265-275 | 55-75 | 88 | 9.5-9.7 |
| 51 104 210 | TEWS-104 | 280-1200 | 1" | 14 | 275 | 75 | 88 | 9.9 |
| 51 244 220 | TEWS-244 | 360-2500 | 1" | 10 | 305 | 75 | 88 | 11.5 |
| 51 354 230 | TEWS-354 | 360-3500 | 1.1/2" | 9 | 315 | 95 | 88 | 12.3 |
| 51 504 240 | TEWS-504 | 700-5000 | 1.1/2” | 3 | 365 | 95 | 88 | 14.4 |
| 51 604 250 | TEWS-604 | 816-6000 | 1.1/2” | 6.5 | 350 | 110 | 130 | 18 |
| 51 904 260 | TEWS-904 | 1024-10000 | 1.1/2” | 2.5 | 390 | 110 | 130 | 20.8 |
-
Available from 200 to 15,000 Nm
-
Freely turning drive unit
-
Quick and precise
-
2-step gear ri./le.
-
200 torque settings
-
Modular build with bearings for continuous use
-
With a torque deactivation system with an accuracy of +/- 3.5% at consistent screwing application
-
Quick, precise, safe and low-noise
-
Devices available in 230 Volt and 110 Volt versions
-
Newly designed drive motor characterised by its robust and maintenance-friendly structure as well as by high performance reserves
-
Right- and left-ward rotation and a 2-step gear; adjustable with 200 torque settings
-
Any position of the operating unit possible; drive motor can be freely turned by 360°, which ensures comfortable positioning of the device on the screw connection
-
Can optionally be either with a load release. This leads to independent loosening of the torsion between the push-on socket and the support. The drive motor briefly turns into the opposite direction for this. This option is indispensable for short assembly times and offers best work safety.
Delivery Content:
- Torque Wrench,
- Certificate of calibration,
- Crank type standart reaction arm
- Torque table
- Bolt quality torque table,
- Manual instruction,
- Metal carrying case
Juwel TEWS Series Angled Type Electric Torque Wrenches PDF
Juwel TEWS-84 Angled Design Electric Torque Wrench - Torque Chart PDF
