The model PG23HP-P Bourdon tube pressure gauge has been designed specifically for high-pressure applications up to 6,000 bar. This makes it one of the few pressure gauges available worldwide which can reliably display pressures of this order of magnitude. Typical measuring points for this pressure gauge can be found in water jet cutting, high-pressure cleaning and test bench construction.

WIKA manufactures and qualifies the model PG23HP-P in accordance with the requirements of the new DIN 16001 high-pressure standard in the “S3” safety version. The safety version is made up of laminated safety glass, a solid baffle wall between measuring system and dial and a blow-out back. In the event of a failure, the operator is protected at the front side, as media or components can only be ejected via the back of the instrument.

Through the use of high-quality stainless-steel and nickelbased alloys, the model PG23HP-P features excellent load cycle stability and long service life. The instrument works reliably within the specification with both static and dynamic pressure profiles. The standard accuracy of the model PG23HP-P is 1.0 %. For scale ranges up to and including 0 ... 4,000 bar, the instrument is optionally available with an improved indication accuracy of 0.6 %. The resistance to shock and vibration can be increased by the optional silicone oil case filling.

Pressure limitation

• Steady: 3/4 x full scale value
• Fluctuating: 2/3 x full scale value
• Short time: Full scale value

Permissible temperature

• Ambient: -40 … +60 °C
• Medium: +200 °C maximum with unfilled instruments
• +100 °C maximum with filled instruments

Temperature effect

• When the temperature of the measuring system deviates
• from the reference temperature (+20 °C): max. ±0.4 %/10 K of full scale value
• Process connection
• Stainless steel 316L

NS 100: Lower mount (radial) or back mount

NS 160: Lower mount (radial)

• G 1/2” B (up to max. 2,500 bar)
• 9/16 - 18 UNF (female) with 60° sealing cone per
• Autoclave Engineers
• M16 x 1.5 (female) with inner sealing cone 60°
• 5/8 - 18 UNF (female) with inner sealing cone 60°
• Others on request

Optional Features

Higher indication accuracy 0.6 % for scale ranges up to and including 0 ... 4,000 bar

• Ingress protection IP66
• Panel mounting flange, stainless steel or polished stainless steel
• Surface mounting lugs on the back, stainless steel
• Mark pointer adjustable from the outside
• Mark pointer on bayonet ring adjustable from the outside

Application Areas

• For liquid media in high-pressure applications
• Test benches (burst pressure tests) 
• Water jet cutting 
• High-pressure cleaning
• High-pressure generation