MTP series test pumps are designed for verification and calibration of pressure manometers and pressure transmitters.
These pumps allow fine-tuning of the pressure to both the reference gauge and testling.
Quick Installation G1/2’’
The MTP test pump has two connection ports. One port is for the device under test and the other is for the device used as a reference. Both ports are equipped with a G1/2” quick-mount adapter. It is extremely easy to connect the devices to the test pump. Installation is done by hand tightening without using any tool. Installation is done by tighteening the nut of the adapter, not the gauges. The mounting adapter includes a sealing gasket.
Test Fluid : Water or Oil
Oil or water can be used as fluid in MTP test pumps. It has a structure suitable for both fluids. However, you should continue with the fluid you started with for the first time. Fluid change after use is not recommended.
Accredited Laboratory Equipment
MTP test pumps are capable of meeting the needs of accredited calibration laboratories. Measurement accuracy varies depending on the reference gauges used. Whatever sensitivity measurement is desired, a digital reference manometer should be selected to meet this sensitivity.
Shipment Content
The MTP manometer test pump is shipped in plastic bag with hard sponge protection.
The shipment includes a G1/4” adapter.
1/4” NPT 1/2” NPT adapters are available on option.
Reference Gauge Options.
Calibration
Reference gauges are shipped with accredited calibration