You can search!
Hazet 9012 P-1 Pneumatic Impact Wrench
1.000 Nm Air Driven Impact Wrench, 1/2“ Square Drive
| Tool Code | 9012 P-1 |
| Cap. Tighteening | 685 N.m |
| Cap. Loosening | 1.000 N.m |
| Square Drive | 1/2" |
| Air pressure | 6.3 bar |
| Air consumption | 127 lt/dk |
| Striking mechanism | Single hammer |
| Adjustment Steps | 3 stages |
| Sound level | 94.4 dB(A) Lp A |
| Tool length | 174 mm |
| Tool weight | 2.5 Kg |
| Brand | Hazet |
Request a Quote
Please fill out the form below or call us at +90 312 386 1464 to get in contact with our sales representatives.
Features
- Loosening torque max. 1000 N.m
- Tightening torque max. 685 N.m
- Square drive size 1/2 ”
- Air pressure needed 6.3 bar
- Recomended hoses diam. 10mm
- Air pressure inlet thread size 3/8”
- Sound pressure level 94.4 dB(A) Lp A
- Air requirement: 127 l/min (2.2 l/sec)
- Twin hammer striking mechanism
- Three stage forward, single stage reverse
- Cold insulated handle for user compfort
- Trade mark Hazet, manufactured in Taiwan
Technical Specifications
Hazet Pneumatic Impact Wrenches
Application: Operating tight screws
- Enhanced power performance due to efficient air guide and improved pull-up torque of the air motor
- Specially heat-treated inner parts for minimised wear
- Ergonomically shaped handle and housing for optimised handling and operation
- Exhaust air is guided through the handle downwards
- Reduced vibrations
- Easy handling
| Features | Units | 9012 A-1 | 9011 M | 9012 SPC | 9012 P-1 | 9012 M | 9012 M-1 | 9012 MT | 9012 MTT |
| Loosening Torque Max. | N.m | 450 | 461 | 850 | 1000 | 1100 | 1200 | 1400 | 1600 |
| Tightening Torque Max. | N.m | 325 | 461 | 750 | 685 | 678 | 678 | 745 | 678 |
| Recommended Torque | N.m | 231 | 375 | 550 | 550 | 610 | 610 | 620 | 542 |
| Square Drive | inch | 1/2" | 3/8" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" |
| Air Consumption | L/d | 113 | 85.2 | 127.4 | 127 | 127 | 127.4 | 135 | 133.1 |
| Sound Level | dB (A) | 92.2 | 90.3 | 92.1 | 94.4 | 97.1 | 92.2 | 92.7 | 92.5 |
| Vibration Level | m/s² | 9.96 | 7.78 | 7.42 | 12.24 | 9.57 | 13.49 | 8.74 | 8.39 |
| Nut Size | mm | M16 | M13 | M16 | M16 | M16 | M16 | M16 | M16 |
| Hose Diameter | mm | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Air Inlet Size | inch | 1/4" | 1/4" | 1/4" | 3/8" | 1/4" | 1/4" | 3/8" | 1/4" |
| Weight | kg | 1.2 | 1.2 | 2.6 | 2.5 | 1.2 | 1.3 | 1.3 | 1.3 |
- Powerful twin hammer mechanism
- Air connection inlet: Inside thread 16.41 mm (3/8″)
- Coupler plug: Nominal size 7.2 (included)
- Recommended torque: 550 Nm
- Hose diameter (recommended): 10 mm
- Working pressure (bar): 6.3
- Sound power level: 105.4 db(A) Lp W
- Vibration acceleration: 12.24 m/s2
- Loosening torque (max) determined with screw size M: 16
- Forward and reverse: three-stage (forward), single-stage (reverse)
- Cold insulated handle
- Output: Square, solid 12.5 mm (1/2 inch)
- Net weight: 2.54 kg
- Tightening torque max.: 685 Nm
- Maximum loosening torque: 1000 Nm
- Sound pressure level: 94.4 dB(A) Lp A
- Revolutions per minute: 7500
- Air requirement: 127 l/min (2.1 l/sec)
Photos
