You can search!
Hazet 9011M Pneumatic Impact Wrench
460 Nm Air Driven Impact Wrench, 3/8“ Square Drive
| Tool Code | 9011M |
| Cap. Tighteening | 460 N.m |
| Cap. Loosening | 460 N.m |
| Square Drive | 3/8" |
| Air pressure | 6.3 bar |
| Air consumption | 85 lt/dk |
| Striking mechanism | Single hammer |
| Adjustment Steps | 3 stages |
| Sound level | 90.3 dB(A) Lp A |
| Tool length | 92 mm |
| Tool weight | 1.24 Kg |
| Brand | Hazet |
Request a Quote
Please fill out the form below or call us at +90 312 386 1464 to get in contact with our sales representatives.
Features
.jpg)
- Loosening torque max. 460 N.m
- Tightening torque max 460 N.m
- Square drive size 3/8 ”
- Air pressure needed 6.3 bar
- Recomended hoses diam. 10mm
- Air pressure inlet thread size 1/4”
- Sound pressure level 90.3 dB(A) Lp A
- Air requirement: 85.2 l/min (1.4 l/sec)
- Single hammer striking mechanism
- Three stage forward, single stage reverse
- Cold insulated handle for user comfort
- Trade mark Hazet, manufactured in Taiwan
Technical Specifications
Hazet Pneumatic Impact Wrenches
- Recommended torque: 375 Nm
- Maximum loosening torque: 461 Nm
- Tightening torque max.: 461 Nm
- Vibration acceleration: 7.78 m/s2
- Hose diameter (recommended): 10 mm
- Coupler plug: Nominal size 7.2 (included)
| Features | Units | 9012 A-1 | 9011 M | 9012 SPC | 9012 P-1 | 9012 M | 9012 M-1 | 9012 MT | 9012 MTT |
| Loosening Torque Max. | N.m | 450 | 461 | 850 | 1000 | 1100 | 1200 | 1400 | 1600 |
| Tightening Torque Max. | N.m | 325 | 461 | 750 | 685 | 678 | 678 | 745 | 678 |
| Recommended Torque | N.m | 231 | 375 | 550 | 550 | 610 | 610 | 620 | 542 |
| Square Drive | inch | 1/2" | 3/8" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" |
| Air Consumption | L/d | 113 | 85.2 | 127.4 | 127 | 127 | 127.4 | 135 | 133.1 |
| Sound Level | dB (A) | 92.2 | 90.3 | 92.1 | 94.4 | 97.1 | 92.2 | 92.7 | 92.5 |
| Vibration Level | m/s² | 9.96 | 7.78 | 7.42 | 12.24 | 9.57 | 13.49 | 8.74 | 8.39 |
| Nut Size | mm | M16 | M13 | M16 | M16 | M16 | M16 | M16 | M16 |
| Hose Diameter | mm | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Air Inlet Size | inch | 1/4" | 1/4" | 1/4" | 3/8" | 1/4" | 1/4" | 3/8" | 1/4" |
| Weight | kg | 1.2 | 1.2 | 2.6 | 2.5 | 1.2 | 1.3 | 1.3 | 1.3 |
- Single hammer Striking mechanism
- Air connection inlet: Inside thread 12.91 mm (1/4″)
- Loosening torque (max) determined with screw size M: 13
- Output: Square, solid 10 mm (3/8 inch) - Net weight: 1.24 kg
- Working pressure (bar): 6.3 - Air requirement: 85.2 l/min (1.4 l/sec)
- Sound power level: 101.3 db(A) Lp W - Sound pressure level: 90.3 dB(A) Lp A
- Forward and reverse: three-stage (forward), single-stage (reverse)
- Cold insulated handle. Revolutions per minute: 6500
- One-hand operation for right and left handed operators
- Exhaust air is guided through the handle downwards Reduced vibrations
Photos
